Add extra protection to your home or business with additional LaserShield® Wireless Detection Units. The Wireless Detection Units communicate with the Master Alarm Unit via wireless radio signals and have a range of 150 Feet (without obstructions).
Wireless Communication
The Wireless Detection Units' use a wireless Radio Frequency (RF) to communicate with the Master Alarm Unit.
Panic Button
On the top of every Wireless Detection Unit is a large red button that functions the same as the one on the Master Alarm Unit. Pressing the panic button will immediately transmit a wireless signal to the LaserShield® Master Alarm Unit and an alarm will be activated, notifying the 24 x 7 Rapid Response Monitoring Service.
Power Connection
The Wireless Detection Unit requires a power connection. There is no need for a phone line.
Bypass Button
A bypass button and indicator light is located under the motion sensor on the front of the unit. This button enables the user to bypass a bedroom Wireless Detection Unit at night. A small amber light will flash indicating the unit is in bypass mode. The bypass button does not affect the function of the panic button.
Battery Back-Up
The battery will provide up to 12 hours of back-up power.
Pet Friendly
A unique Pet Shield instantly snaps into place on the front of the LaserShield® motion detector on the Wireless Detection Unit. The Pet Shield blocks portions of the motion sensor so your pet is less likely to trigger an alarm.
